TP-Link Omada SX3032F 32-Port 10GE SFP+ L2+ Managed Switch
- 32 x 10 Gbps SFP+ slots
- 640 Gbps switching capacity
- Two internal fixed power modules support each other
- Centralized cloud management via web or Omada app*
- Standalone management via web, CLI, SNMP and RMON
- Static routing helps direct internal traffic for higher efficiency
- VLAN, ACL, QoS, IGMP Snooping, OAM and DDM
- ERPS supports fast protection and recovery in ring topology
- Durable metal housing and rack-mountable design
Software-Defined Networking (SDN) with cloud access. Remotely manage your access points, switches and gateways in multiple sites from a single interface.
Product features:
Interface | - 32 x 1/10Gbps SFP+ slots - 1 x RJ45 console port - 1 x Micro-USB console port |
---|---|
Number of fans | 2 internal fixed fans |
Physical lock protection | Yes |
Power supply | - 1+1 redundant power supply (internal fixed) - 100-240 V AC~50/60 Hz |
Dimensions (W x D x H) ) | 17.3x13.0x1.7 inches (440x330x44 mm) |
Mounting | Can be mounted in a trunk |
Max. power consumption | 49.4 W (220 V / 50 Hz) |
Switching capacity | 640 Gbps |
Packet data rate | 240 Mpps |
MAC address table | 32 K |
Packet buffer memory | 24 Mbit |
Jumbo frame | 9 KB |
Quality of service | - 8 priority queues - 802.1p CoS/DSCP Priority - Queue Schedule: SP (Strict Priority), WRR (Weighted Round-robin Mode), SP+WRR - Bandwidth Control: Port/Flow Based Rate Limiting - Smoother Performance - Flow Action: QoS Remark (802.1P Remark, DSCP Remark) |
L2 and L2+ Features | - 128 IP Interfaces: Supports IPv4/IPv6 Interface - Static Routing: 48 IPv4/IPv6 Static Routes - Static ARP: 128 Static Entries - 510 ARP Entries - Proxy ARP - Gratuitous ARP - DHCP Server - DHCP Relay: DHCP Interface Relay, DHCP VLAN Relay - DHCP L2 Relay - Link Aggregation - Spanning Tree Protocol - Loopback Detection - 802.3x Flow Control - Mirroring |
L2 Multicast | - Supports 4000 (IPv4, IPv6) IGMP groups - IGMP Snooping - IGMP Authentication - Multicast VLAN Registration (MVR) - MLD Snooping - Multicast Filtering: 256 profiles and 16 entries per profile |
Advanced Features | - Auto Device Discovery * - Batch Configuration * - Batch Upgrade firmware * - Intelligent Network Monitoring * - Unified Configuration * - Restart Schedule * ISP Features : - L2PT (Layer 2 Tunneling Protocol) - Device Link Discovery Protocol (DLDP) - PPPoE ID Insertion - ERPS - 802.3ah Ethernet Link OAM - DDM - sFlow |
VLAN | - VLAN Group (802.1q VLAN): Max. 4K VLAN Groups - 802.1Q Tagged VLAN - MAC VLAN: 30 entries - VLAN Protocol - GVRP - VLAN VPN (QinQ): VLAN Mapping, VLAN Replace - Voice VLAN |
Access Control List | - Time-based ACL - MAC ACL: Source MAC, Destination MAC, VLAN ID, User Priority, Ether Type - IP ACL: Source IP, Destination IP, Fragment, IP Protocol, TCP Flag, TCP/UDP Port, DSCP/IP TOS - Combined ACL - Packet Content ACL - IPv6 ACL - Policy: Mirroring, Redirect, Rate Limit, QoS Note - ACL applies to port/VLAN |
Protection | - IP-MAC-Port Binding - 512 Entries - DHCP Snooping - ARP inspection - IPv4 Source Guard - IPv6-MAC-Port Binding - 512 Entries - DHCPv6 Snooping - ND Detection - ND Snooping - IPv6 Source Guard - DoS Defend - Static/Dynamic Security of porFeatures: Up to 64 MAC addresses per port - Broadcast/Multicast/Unicast Storm Control: kbps/ratio control mode - 802.1X - Basic port authentication - MAC-based authentication - VLAN Assignment - MAB - Guest VLAN - Radius authentication and accounting support - AAA (including TACACS+) - Port isolation - Secure web management via HTTPS with SSLv3/TLS 1.2 - Secure command line interface (CLI) management with SSHv1/SSHv2 - IP/port/MAC-based access control |
IPv6 | - IPv6 Dual IPv4/IPv6 - Multicast Listener Discovery (MLD) Snooping - IPv6 ACL - IPv6 interface - Static IPv6 Routing - IPv6 Neighbor Discovery (ND) - Maximum Transmission Unit (MTU) detection - Internet Control Message Protocol (ICMP) version 6 - TCPv6/UDPv6 - IPv6 Applications: DHCPv6 Client, Ping6, Tracert6, Telnet (v6), IPv6 SNMP, IPv6 SSH, IPv6 SSL, Http/Https, IPv6 TFTP |
MIB | - MIB II (RFC1213) - Interface MIB (RFC2233) - Ethernet Interface MIB (RFC1643) - Bridge MIB (RFC1493) - P/Q-Bridge MIB (RFC2674) - RMON MIB (RFC2819) - RMON2 MIB (RFC2021) - Radius Reporting Client MIB (RFC2620) - Radius Authentication Client MIB (RFC2618) - Remote Ping, Traceroute MIB (RFC2925) - TP-Link private MIB support |
Own the app | yes Requires the use of Omada Hardware Controller, Omada Cloud-Based Controller or Omada Software Controller. |
Centralized Management | - Omada Cloud Controller - Omada Hardware Controller - Omada Software Controller |
Cloud Access | yes Requires use of Omada Hardware Controller, Omada Cloud-Based Controller or Omada Software Controller. |
Zero-Touch Provisioning | yes Requires use of Omada Cloud-Based Controller. |
Management Features | - Web-based GUI - Command Line Interface (CLI) via console port, telnet - SNMP v1/v2c/v3: Trap/Inform, RMON (1,2,3,9 groups) - SDM Template - DHCP/BOOTP Client - 802.1ab LLDP/LLDP-MED - DHCP Auto-Install - Dual Image, Dual Configuration - CPU Monitoring - Password Recovery - SNTP - System Registry |
Certificates | CE, FCC, RoHS |
Package Contents | - SX3032F Switch - 2 x Power Cords - Quick Installation Guide - Rack Mount Kit - Rubber Feet |
System Requirements | Microsoft® Windows® 98SE, NT, 2000, XP, Vista™ or Windows 7/8/10/11, MAC® OS, NetWare®, UNIX® or Linux. |
Environment | - Operating temperature: -5–45 °C (23–113 °F); - Storage temperature: -40–70 ℃ (-40–158 ℉) - Operating humidity: 10–90% RH non-condensing - Storage humidity: 5–90% RH non-condensing |
Warranty | 60 months |
* These features require the use of the Omada SDN controller. Zero-touch provisioning requires the use of the Omada cloud-based controller. Go to Omada Cloud-Based Controller product list to find all models supported by Omada Cloud-Based Controller.
Note: It is recommended to use a maximum of 8 SM5310-T (TL-SM5310-T) modules with SX3032F, with one module used for every two sets of SFP+ slots.